There may come a time when you have issues with your plumbing, whether it’s a clogged sink or plugged up toilet. Check out the tips and suggestions in the article below that will show you easy things you can do on your own to solve these issues, and save a call to a plumber.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
It is a advisable to have a septic tank pumped every five years to keep it in peak condition. This will keep sediment from building and causing backup into the house, and possibly causing the septic system to fail. It is a small price to pay now to keep your septic in good working order and prevent having to pay for a major repair caused by a backup.
Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!
Check your faucets for leaks. Check the knobs and the faucet itself. Hundreds of gallons of water a day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself a lot of money. Leaks can grow over time as well, so avoid a disaster and check all faucets for leaks!
In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.
Cover pipes that are outside or in cool areas. Use heat tape to make sure that the pipes are completely covered and insulated. This will prevent frozen pipes in the winter, which can be an expensive problem. Check outdoor pipes for other problems such as leaks and cracks which are better to catch early.
Try to limit the amount of hair that goes down your drains. Hair can become tangled up in the pipe and end up blocking up the them, preventing water from flowing smoothly. Buy a cheap screened drain cover to put over your drain to stop any hair from going down and clean it off regularly.
Believe it or not, it is not a very good idea to use a plunger if your toilet is clogged. Plungers just push whatever is stuck deeper into the drain. Instead, it is a better idea to use a closet auger. It will do a better job and is affordable.
Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.
To make sure there is no accident or sudden rush of water when you tackle a plumbing project, make sure you are ready for a cleanup. If you go into the work with a huge stack of towels and blankets ready to absorb water, the prospect of needing to actually do it will keep you alert enough to avoid triggering the accident in the first place.
To prevent pipe banging when you turn on the water, think about rubber blankets or straps. Instead of assuming the pipes need replaced, consider anchoring them or buffering them. If your pipes are plastic, leave them some room for expansion and contraction. If pipes do not leak but just make noise, eliminate the noise.
Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.
Plumbing is one of those jobs that you should not do your self. If it is something easy like a toilet repair or changing out a faucet, go ahead and give it a try. If it is a major repair, then you are better off hiring a contractor and it may be required to have a licensed plumbing contractor do the work for you.
To lessen the amount of hair going into your home plumbing, thoroughly brush hair and use a body brush to remove loose body hair before entering the shower or bath. If it’s been a while since you have shaved your legs or face, use an electric razor to remove the longer hair, before shaving in the sink or shower.
As was shown in the above article, there are many plumbing issues that can be handled by someone other than a plumber. Once you take the time to read how to do it, you will be amazed at the things you will be doing without the expense of an expert.
Los Angeles CA